#2 - Shelf Lot Consisting of Assorted Aluminum, Electric Motor, Cleaning Supplies, Etc.

#4 - Shelf Racking Lot Consisting of 21 +/- Metal Bins Containing Nails of Assorted Sizes, PSI Gauges, Hose Clamps, Etc.

#6 - Metal Bin Containing Assorted Brass

#8 - Metal Bin Containing Large Metal Threading Taps

#10 - Stevenson Cupola with Copper Roof, Approx. 18 x 18

#11A - Includes Reliance 5C Collet Stand With Collets Of Various Sizes and Various Metalworking Jigs, Tooling, Etc.

#13 - Lot of 3 Metal Wire Pulling Snakes

#15 - Lot of 3 Totes Containing Assorted Hand Tools

#17 - Rack Lot Including Rack Consisting of Assorted Motors, Electrical Cables, Assorted Steel, Metal Chains, And Other Assorted Metal

#19 - Foot Operated Stainless Steel Sink Made by Koch, Approx. 21"W x 36"H

#20A - Starrett 40"L 36"W 6" Thick Grade B Crystal Pink Granite Inspection Surface Plate, Shop/Tool Room Grade, .0008" Unilateral Tolerance, On Rolling Stand. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#22 - Assorted Pulleys and Handles

#24 - Assorted Sheet Metal, Steel and Aluminum

#26 - Hammond Carbide Tool Grinder Model D6, 230V, 3-Phase, 1/2HP, Includes Additional Grinding Disc. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#28 - Ralmikes Tool-Arama Demagnetizer 110V, 6" Diameter

#30 - Starrett No.25B Height Gauge

#32 - Contents of 2 Drawers (Drawers Not Included) Consisting of Hold Down Hardware, Screws, Nuts, Bolts, Bearings, Etc.

#34 - Drawer Contents (Drawer Not Included) Consisting of Starrett No.459 Cutter Clearance Gauge, Assorted Hold Down Bracketry

#36 - Drawer Contents (Drawer Not Included) Consisting of Equipment Parts, Grinding Wheel Dresser, Misc. Tooling

#38 - Delta Rockwell Grinder Wired for 110V or 230V, 1/2HP, 7" Discs, Includes Additional Griding Disc

#40 - South Bend Lathes Chart/Parts Diagram

#42 - Torit Model 75 230V, 3-Phase Dust Collector

#44 - Weather Plaque

#46 - Lot of Morse Taper Adapters

#47 - Craftsman Home and ShopVac Model No.758.1783T, 110V

#50 - Assorted Wall Plaques Including Eagle, Stone Plaque, "Off Hand I'd Say This Is Going To Cost You Plenty, and That Is Only An Estimate"

#52 - Themac Type J-3 115V Type J-35 With No. 2025 Spindle Assembly

#54 - Lot of Assorted Punches

#56 - Dumore Tool Post Grinder with Case

#58 - Biax Power Scraper

#60 - Lot of Files

#62 - Precision Square

#64 - 4 Jaw Chuck

#66 - Wesson Machinist Vise with Swivel and Tilt

#69 - Lot of Swivel Casters

#71 - Cincinnati Universal Grinder with Attachments 240V, 3-Phase, Includes Contents of Many Drawers of Tooling, Arbors, NMTB 50 Collet, Bits, Grinding Wheels, Etc. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $100.00. No other rigger is permitted onsite.

#73 - Universal Attachment for Cincinnati Grinder

#75 - Tool Stop for Cincinnati Grinder

#77 - Universal Vise for Cincinnati Grinder

#79 - Darex Diamond 180 Grit Wheel

#81 - Darex Drill Sharpener 1/3HP, 115V, On Stand, Includes Additional Tooling

#83 - Empty Machinist Toolbox

#85 - Lot of 2x4 Fluorescent Lighting with T8 Bulbs

#87 - Air Tank

#89 - Shelving Unit with Assorted Screws, Polishes, Stains, Etc.

#91 - Set-Up Clamps

#93 - V-Block Parallel, End Mills, Air Fittings, Air Regulator

#95 - Bar Clamp

#97 - 2-1 1/2 - 8 Taps

#99 - Carbide Inserts

#101 - Kwik Switch 200 Tooling

#103 - Lot Consisting of Number Stamps, Parallel Bars, Sign Bars, Etc.

#105 - Tapping Head

#107 - Morse Taper Adapters

#109 - Number 2 Taper Shank Drill Bits

#111 - Metric Drill Bits

#113 - Silver Deming Drills

#115 - Masonry Drill Bits

#117 - Left Handed Drill Bits

#119 - Spade Bit Extensions

#121 - Drill Bits, Long Shank

#123 - Counter Sinks

#125 - Counter Bore Pilots

#127 - Drill Bushings

#129 - Number Stamps

#131 - Tapping Heads

#133 - Chuck Keys and Drifts

#135 - Roll of Absorption Mat

#137 - Drawer Lot Consisting of Tapered Shafts, Gauge Pins (DRAWER NOT INCLUDED)

#139 - Drawer of Heli-Coil Accessories (DRAWER NOT INCLUDED)

#141 - Drawer Lot Consisting of Electrical Wires, Outlet Ends, Lamp Parts, Etc. (DRAWER NOT INCLUDED)

#143 - Drawer Lot Consisting of Spacers, Hole Punches, Electrical Wire, Etc. (DRAWER NOT INCLUDED)

#145 - Spacers, Machine Bolts, Lathe Hold Down Nuts, Jacob Chuck Adapters, Rivets, Etc.

#147 - Drawer Lot Consisting of Large Heli-Coils, Heli-Coil Accessories and Installation Tools (DRAWER NOT INCLUDED)

#149 - Stainless Hardware, Allen Head, Set Screws, Cotter Pins, Nuts, Washers

#151 - 2 Drawers of Iron Pipe and Fittings (DRAWER NOT INCLUDED)

#153 - 2 Drawers Consisting of Machinist Screws, Mostly Allen Head (DRAWER NOT INCLUDED)

#155 - Drawer Lot Consisting of Shear Pins, Roll Pins (DRAWER NOT INCLUDED)

#157 - Lathe Tool Holders and Tail Stock Centers

#159 - Dial Indicators

#161 - Dial Indicators

#163 - Dial Indicators

#165 - Dial Indicators

#167 - Dial Indicators

#169 - Dial Indicators

#172 - Dial Indicators

#174 - Dial Indicators

#176 - Dial Indicators

#178 - Drawer Lot Consisting of Carbide Inserts and Bushings (DRAWER NOT INCLUDED)

#180 - Drawer Lot Consisting of Hex and Socket Hardware (DRAWER NOT INCLUDED)

#182 - Drawer Lot Consisting of Assorted Reamers (DRAWER NOT INCLUDED)

#184 - Drawer Lot Consisting of Dial Indicators, Last Word Gauges (DRAWER NOT INCLUDED)

#186 - Drawer Lot Consisting of Files (DRAWER NOT INCLUDED)

#188 - Drawer Lot Consisting of Files (DRAWER NOT INCLUDED)

#190 - Propane Torches, Rivets, Soldering Iron, Etc.

#192 - Hex Head Bolts

#194 - Hex Head Bolts, Assorted Nuts/Washers

#195 - Assorted Expansion Hand Reamers

#197 - Peg Board Hooks

#199 - New In Box,Toauto Shenzhen Easy Rotating Industries Digital Readout with Scales 25u-500mm and 1 5u-1000 Scales

#201 - LED Work light for Drill Press

#203 - Drill Bit Organizer Cabinet with Fractional Drill Bits, Wire Gauge

#205 - Lot of Parallel Bars

#207 - Lot of Parallel Bars

#209 - Lot of Parallel Bars

#211 - Steel Surface Plate, Approx. 18" x 12"

#213 - GE Steam Gauge Brass, Approx. 6"

#215 - Tape Guns, Tape, Sears Craftsman Glue Gun

#217 - Box Lot of Reamers

#219 - Tray Lot of Tapered Reamers

#221 - Solvent Tank 28L x 12W

#223 - Tray of Tapered Reamers

#225 - Measuring Gauges with 1" Steel Balls

#227 - MHC Coaxial Centering Indicator

#229 - Assorted Roll Pins

#231 - Spanner Wrenches

#233 - Spanner Wrenches

#235 - Drawer Contents Consisting of Assorted Nails (DRAWER NOT INCLUDED)

#236A - Lot of Assorted Cutters, Snap Ring Pliers

#236C - Assorted Punches

#238 - Drawer Lot Consisting of Screwdrivers (DRAWER NOT INCLUDED)

#240 - Partial Drawer Lot Consisting of Metric Sockets 1/2" Drive with Extension, Swivels, Etc. (DRAWER NOT INCLUDED)

#240B - Partial Drawer of 1/4" Drive Sockets, Allen Wrenches, Tap Extractors, Air Hose Fittings, Etc. (DRAWER NOT INCLUDED)

#242 - Bridgeport Shaping Attachment Serial No.E2054, 70-420 Strokes PM, 110V

#244 - Lot of Hacksaw Blades

#246 - Assorted Squares and Gears

#248 - Lot of Assorted Hammers

#250 - Snap-On Wrenches (Metric)

#252 - Bridgeport 12" Rotating Machinist Table

#254 - Snap-On 25' Tape Measure

#256 - Snap-On and Blue Point Metric Wrenches

#258 - Morris Taper Adapters

#260 - Lot of Swivel Impact Sockets, 1/4", 3/8", 1/2" Drive

#262 - Lot of Tap Holders and Star Bit Sockets

#264 - Multi-Voltage Test Set with Test Leads

#266 - Snap-On Pick Set

#268 - Lot of Mechanic Wire, Solder

#270 - Lot of Adjustable Wrenches

#272 - Machinist Toolbox Contents, CONTENTS ONLY DOES NOT INCLUDE TOOLBOX

#274 - Quick Tool Post Holder for Lathe

#276 - Armstrong Quick Change Tool Post Model 81-009

#278 - Tap Holders

#280 - Die Holders

#282 - Die Holders

#284 - Die Holders

#286 - Large Tap Holders

#288 - Lot of Assorted Jaws for 3-Jaw Chucks

#290 - Jaws for 4-Jaw Chuck

#292 - Dial Gauge

#294 - Chuck Jaw T Wrenches

#296 - Lot of Drill Chucks, Tail Stock Centers

#298 - Monarch 10ee Round Dial Lathe 10x30 Bed, Variable Speed with Frequency Drive, 240V, 3-Phase, 3 Jaw Chuck, Quick Change Tool Post, Steady Rest, Recently Reground and Apron and Tail Stock Refitted. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $500.00. No other rigger is permitted onsite.

#300 - Drawer Lot Consisting of Small Round Files (DRAWER NOT INCLUDED)

#302 - Small, Round and Knife Files

#304 - Keyway Broaches

#306 - Box Lot of Brass and Copper Scrap

#308 - Nut Taps

#310 - Lot of Reamers and Taps

#312 - 2 Drawers Consisting of Large Tapered Pin Reamers, Plastic and Lead Anchors (DRAWER NOT INCLUDED)

#314 - Cut Off Carbide Inserts

#316 - Tri-Carbide Inserts

#318 - Approx. 60+/- Drawer Contents Consisting of Large Hole Punches, Grommet Dies, Cap Screws, Hex Nuts, Allen Cap Screws, Etc. (CONTENTS ONLY, DOES NOT INCLUDE DRAWERS)

#320 - Bosch Laser Measurer Model GLM20

#322 - 13mm Drill Bits

#324 - 3/8 Drive Craftsman Metric Sockets

#326 - Wire Strippers

#328 - Arboga Model GL2508 Drill Press 3-Phase, 60Hz, 230V. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $200.00. No other rigger is permitted onsite.

#330 - Box of Assorted Taps and Dies, Die Handles

#332 - Box of Assorted Torch Handles and Tips

#334 - 11 Brown and Sharpe Micrometers, Assorted Sizes

#336 - Last Word Indicator, Depth Gauge, Telescoping Mic

#338 - Diameter Micrometer

#340 - Brown and Sharpe Wedge Gauges

#342 - Mitutoyo Telescopic Gauges

#344 - Chuck, Vise Wrench, T Bar Wrench

#346 - Boring Heads with R8 Adapter and 3/4" Straight Shank

#348 - Indicator for Bridgeport Quill

#350 - T-Slot Hold Down Kit

#352 - R8 and Quick Change Arbors with Facing Heads

#354 - Circle Cutter with R8 Arbor

#356 - 3/8" Shank Double End Mills

#358 - End Mills 1/2"-1"

#360 - End Mills Some Carbide

#362 - 3/4" Shank Single End Mills

#364 - 5/8" Shank Double End Mills

#366 - 1/2" Shank Single End Mills

#368 - End Mills Ball

#370 - 3/4" - 1" Shank Large Diameter End Mills

#372 - 7/8" Shank End Mills

#374 - Woodruff End Mills

#376 - Tapered End Mills

#378 - Arbor Slitting Saw

#380 - Allen Wrenches, Smaller

#382 - Cam Lock Cutters

#384 - 1/2" Hold Down Clamps

#386 - 5/8" Fixture Tooling

#388 - 3/8" Fixture Tooling

#390 - 15 Drawers Consisting of Flap Wheels, Sanding Cones, Mounted Stones, Wire Wheels, Steel Wool, Etc. (CONTENTS ONLY, DRAWER NOT INCLUDED)

#392 - 2 Drawers Consisting of RJ Collets 1/64 and 1/8 (CONTENTS ONLY, DRAWER NOT INCLUDED)

#394 - Box Lot of Travel Dial Indicators

#396 - Bridgeport Limit Switch Rods, 1-52" 1-41 1/2"

#398 - Box Lot of Griding Stones/Wheels

#400 - Lot of Taps

#402 - Set of 5C Collets and Tail Stock Tooling

#404 - Lot of Drill Bits

#406 - Lot of Drill Bits

#408 - 3/4" Drill Chuck with Morse Taper Shank

#410 - Box Lot of Live Centers

#412 - Machinist Vise 4"

#414 - Machinist Vise 4"

#416 - T-Slot Table Approx. 18" x 24"

#418 - Buffer on Pedestal 1HP, 230V. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#418B - Bridgeport Right Angle Head

#420 - Edge Technologies Flatness Gauge

#422 - End Mills, Assorted Sizes with Wooden Holder

#424 - Lathe Center Bits and Deburring Tools

#426 - Aeration Plate

#428 - Horizontal Mill Cutters

#430 - Small Parts Bin with Grease Fittings, Oil Fittings, Nails, Etc.

#432 - Large Lot of Bins Consisting of Sheetrock Screws, Nails

#434 - Facing Mills and Horizontal Mill Adapters

#436 - Horizontal Mill Cutters

#438 - Horizontal Mill Shaft Spacers

#440 - Horizontal Mill Cutters

#442 - Horizontal Mill Cutters

#444 - Horizontal Mill Cutters

#446 - Horizontal Mill Cutters

#448 - BT40 Arbors Quantity of 2

#450 - BT40 Arbors Quantity of 2

#452 - BT40 Arbors Quantity of 2

#454 - BT40 Slitting Shafts Quantity of 2

#456 - BT40 Arbors Quantity of 2

#458 - BT40 Arbors Quantity of 2

#460 - Quick Change Tooling

#462 - Quick Change Tooling

#464 - Quick Change Tooling

#466 - Quick Change Tooling

#468 - BT40 Taper Horizontal Shafts, Quantity of 2

#470 - BT40 Facing Heads

#472 - BT40 Boring Head

#474 - 4 BT40 Facing Heads

#476 - Brown and Sharpe Omniversal Model0 Milling Machine with 3 Different Heads, 240V, 3-Phase. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $100.00. No other rigger is permitted onsite.

#478 - 24" x 36" Granite Surface Plate with Stand. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#480 - Brown and Sharpe Gear Set for Indexing Head

#483 - Set of 2 Angle Plates

#485 - Set of 2 Angle Plates

#487 - Lot of 3 Height Scribers

#489 - Wall Lot Consisting of Various Measurement Tools

#491 - Radius Measurement Gauge

#493 - Carbide Tool Bits

#495 - Height Gauge

#497 - Stand for Height Gauge

#499 - Assorted Height Gauges and Squares

#501 - Adjustable Height Table, Approx. 24" x 36"

#503 - 3 Assorted Drill Bit Indexes with Drill Bits

#505 - Right Angle Fixture Table 3 1/2 x 3 1/2

#507 - Magnetic Vise 7x4 with 110V Input

#509 - Tail Stock

#511 - Small Indexing Head with Tail Stock

#513 - Lot of Machinery Leveling Feet

#515 - 5C Collet Set with Holder

#517 - Material Holder with Assorted Threaded Rod, Square Stock, Round Stock, Etc.

#519 - Lot of Hole Saw Blades and Assorted Arbors

#524 - Pipe Vise

#526 - Band Saw Guides

#528 - Pipe Cutter

#530 - Ridged No.1-2 Pipe Cutter

#532 - Pipe Cutter

#534 - Manual Pipe Threader with Assorted Dies

#536 - Yard Sticks and Straight Edges

#538 - Set of Plug Gauges

#540 - Lot of Assorted Hose Clamps

#542 - 9" & 8" Indexing Plates, Inside Diameter 1 1/2"

#544 - Stair Chair Model SL300 24V, 52" Track

#546 - Copper Pipe from 1/2" - 3"

#548 - Eye Bolts and Clevis

#550 - Cabinet Contents Consisting of Ball Bearing, Morse Taper Gauges, Machinery Handbook, Vise, Etc. (CABINET CONTENTS ONLY, CABINET NOT INCLUDED)

#552 - Blocks

#554 - V-Blocks

#556 - V-Blocks with Clamps

#558 - Cabinet Contents Consisting of Set-Up Blocks, V-Blocks, Clamps, Machinist Vise, Angle Plates, Etc. (CONTENTS ONLY, CABINET NOT INCLUDED)

#560 - Lot of Assorted Levels

#562 - Shelf Lot Consisting of Assorted Paints, Air Tool Oils, Etc. (CONTENTS ONLY, SHELF NOT INCLUDED)

#564 - Tooling Holders and Set Up Jacks

#566 - Boring Bars and Carbide Tool Holders

#568 - Carbide Tool Holders, Threading Indicators

#570 - Corded Stapler Arrow T50

#572 - Makita 10mm Right Angle Drill, Corded

#574 - Craftsman Drywall Screwdriver, Corded

#576 - Heli-Coils Size 1"-8, 3/8"-18NPT, 7/8"-9

#578 - Centering Pins

#580 - Precision Levels - 1 Starrett, 1 Strich Ausschlag

#582 - Centering Pins

#584 - Brown and Sharpe Knife Straight Edge

#586 - Height Gauge

#588 - Vernier Protractor

#590 - MagnaLock Straight Edges

#592 - Set of 2 Safety Covers

#594 - Magnetic Chuck 12x6 Manufactured by Bux

#596 - Center Pins

#598 - Set-Up Blocks

#600 - Expanding Mandril

#602 - Sign Plate

#604 - 24 Drawer Lot Consisting of Taps and Dies, Left Hand and Standard, Taps Appear to go up to 1" (CABINET IS INCLUDED IN THIS LOT)

#606 - Expanding Mandril

#608 - Keyway Broaches

#610 - Starrett Weber Gauge Block Set

#612 - Hardinge Dividing Head with Indexing Plates and Tailstock

#613 - Bridgeport 15" Rotary Table

#615 - Monarch Faceplate 11"

#617 - Faceplate Fixtures

#619 - Monarch 4 Jaw Chuck 8" with Extra Jaws

#621 - 3 Jaw Chuck 6" with Taper Mount

#623 - Riser Blocks, Rotary Table Setters

#625 - Kurt Vise Air Attachment with Horizontal Shaft, Vise Tooling

#626 - Tail Stock

#628 - Collet Draw Bars

#630 - 14x3x2 Set-Up Blocks

#632 - Table for Machine Accessories

#634 - Heat Gun

#636 - Indexing Plate 5 1/2" with 1" Diameter Arbor, Indexing Plate Tooling and Morse Taper Adapters

#638 - Shelf Lot Consisting of 8" Monarch Magnetic Chuck, Lathe Dogs, Monarch 11" Faceplate (CONTENTS ONLY, SHELF NOT INCLUDED)

#640 - Misc. Machine Tooling Fixtures

#642 - Threading Attachment

#644 - Production Tooling for Turret Tail Stock

#646 - Production Tooling for Turret Tail Stock

#648 - Indexing Chuck

#650 - Monarch 10EE Production Lathe with Collet Chuck and Turret Tail. Apron Clamps to Bed and Tail Stock Can Auto Feed. 240V, 3-Phase. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $400.00. No other rigger is permitted onsite.

#652 - Diacro 24" Electric Shear 110V

#654 - BT50 Tooling 5 Pieces

#656 - 6" Roper and Whitney Corner Notcher

#658 - 2 Router Tables, 1 with Router

#660 - Pexto 24" Manual Roller

#662 - Metal Working Vise

#664 - Shelving Unit Contents Consisting of Transmission Parts, Timing Covers, Flashing, and 3 Shelf Units

#667 - Hand Cart

#670 - Organizer Bin with Belts, Assorted Electrical Supplies

#672 - File Cabinet with Contents Consisting of Electrical Supplies, Push Button Switches, Faceplates, Limit Switches, Brass Valves, Etc.

#674 - Engine Cradle

#676 - File Cabinet with Contents Consisting of Round Stock, Hollow Stock, Flat Stock, Angle Stock

#678 - File Cabinet with Contents Consisting of Wire, Aluminum Plates, Etc.

#680 - Drawer Contents Consisting of Gears, Sanding Drums, Assorted Parts, Etc. (DRAWERS INCLUDED)

#682 - Organizer Drawer with Assorted Brass Fittings

#684 - Snap-On Fluorescent Light Bulb

#686 - 2-6" Narrow Face Wire Wheels

#688 - V-Blocks

#690 - Craftsman Adjustable Workbench

#692 - Angled Parallels

#694 - Magnetic Vise

#696 - Parallels to Use on Magnetic Vise

#698 - Sign Plate

#700 - Hardinge 4 Jaw Chuck Model 36HCX 5"

#702 - Ralmike Sign Vise

#704 - 2 Angle Plates

#706 - Monarch Control Box

#708 - 2 Retractable Electrical Reels

#709 - 4 Equipment Machinery Dollies

#711 - Nut and Bolt Organizer with Drawers of Screws and Lathe Tooling

#713 - 2 Shelf Lots of Monarch Parts

#715 - Box Lot Consisting of Monarch Parts

#717 - Lot Consisting of Pipe Wrenches and Adjustable Wrenches

#719 - Complete Transmission Rebuilding Workbench Includes Snap-On Wrenches (Metric and SAE), Matco and Snap-On Pliers, Specialty Tools for Disassembling and Reassembling Transmissions, Transmission Rotator, Solvent Tank, Spring Compressor, Seal Setting Tools, Seals, Specialty Tools, Punches, Nuts, Bolts, Bearings, Parts

#721 - Cyclone Dust Collector

#723 - Craftsman Table Saw 10"

#725 - Transmission Rebuild Kits, Transmission Manuals, Contents and Double Wide Shelving Unit

#727 - CM 1/2 Ton Electric Chain Fall 110V with Trolley. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#729 - Hardinge Production Lathe Model HC 1.5HP, 220V, 3-Phase. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $400.00. No other rigger is permitted onsite.

#731 - 3 Wooden Step Ladders (2-6',1-8'), 1 Aluminum Step Ladder Approx. 6'

#733 - Shelf Lot Consisting of Machinist Vise, Handles, Brake Fluid, Paint, Etc.

#734 - Machinist Vise

#736 - Shelf Lot Consisting of Angled Side Plate, Tail Stock, Angle Fixture

#738 - Shelf Lot Consisting of Paint Thinner, Cool Mist, Cleaners, Etc.

#740 - Shelf Lot Consisting of 3 Transmissions, Assorted Tail Shafts, Etc.

#742 - GM Transmission

#744 - 2 Bins of Transmission Parts

#745A - Lathe Turret Cross Feed and Gears For Harding Indexing Head

#745C - Small Lathe Apron

#747 - 18 Drawer Organizer Bin Consisting of Transmission Bin, Includes Cabinet

#749 - Rear End Center Chunk

#751 - Lot Consisting of 3 Ladles

#753 - Wire Brushes for Thread-On Grinder

#755 - 2 Jaw Clamps

#757 - Lot Consisting of C-Clamps

#759 - Lot of C-Clamps

#761 - 2- Dual Angle C-Clamp Fixture

#763 - Shelf Lot Consisting of Snap-On 4 1/2" Grinder, Assorted Welding Rod

#765 - Large Lot of Mostly 7" Grinding/Sanding Discs, Includes Some 4 1/2"

#767 - Lot of Vise Grip Clamps

#769 - Pallet Jack 4500lb Capacity

#771 - Tooling for Surface Grinder and Assorted Grinding Wheels

#773 - Brown and Sharpe 618 Hydraulic Surface Grinding Machine, 220V, 3-Phase. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $200.00. No other rigger is permitted onsite.

#775 - Eastwood Dual Voltage Powder Coating System with Powder Coat Powder

#777 - BurgMaster Turret Drill Press 6 Head, 240V, 3-Phase On Stand with Casters. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $100.00. No other rigger is permitted onsite.

#779 - Cabinet (Cannot Be Removed Until After Removal)

#781 - Drawer Lot Consisting of Morse Taper Drill Bits

#783 - Drawer Lot Consisting of Morse Taper Drill Bits

#785 - Drawer Lot Consisting of Hold Downs, Tapered Drill Bits

#787 - Drawer Lot Consisting of Transmission Tools and Accessories

#789 - Adjustable Height Roller Stand

#791 - Greenerd No. 4 Arbor Press. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $100.00. No other rigger is permitted onsite.

#793 - Grinding Discs, Most Appear to be 7" with 1 1/4" Arbor

#795 - Craftsman Direct Drive Scroll Saw 16"

#797 - Shelf Lot Consisting of Vintage Cans, GE Apprentice Shop Brick, Dupont Deluxe Kodak Developer, Etc.

#799 - Bottom Shelf Lot Consisting of Vintage Pipe Wrenches, Nail Puller, Door Knobs, Tools, Vehicle Emblems

#801 - Shelf Lot Consisting of Jig Saw, Power Strip, Nuts/Bolts, Etc.

#803 - Vintage Electric Jack Hammer

#805 - Electric Drill with Collet Style Chuck System

#807 - Drill

#809 - Fusion 750W Power Inverter

#811 - Milwaukee Right Angle Drill

#813 - Hot Shot Sound and Light Laser Level

#815 - Powder Actuated Fastener Gun

#817 - Router Bits and Craftsman Router

#819 - Tool Pouch with Tools

#821 - Budget 1/2 Ton Electric Chain Fall, 110V with Trolley. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#823 - Large Lot of Buffing Wheels and Buffing Compounds

#825 - Lot Consisting of Mostly Flap Disc Abrasive Flap Wheels and Assorted Grinding Wheels and Grinding Discs

#827 - Rockwell 10" Pedestal Grinder 1 1/2HP, 220V, 3-Phase. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#829 - Driver GR100 Pedestal Grinder 1HP, 3-Phase, 240V, 10" Wheel. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#832 - Eaton 2 Ton Chain Fall with Trolley, Needs Repair, Non Functional, Cover Included. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#834 - Hand Cart with 5' Extension Hand Raise. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#836 - Lot of 3 Pipe Wrenches, Hacksaw and Puller

#837A - Ornate Vintage Air/Pressure Regulator

#839 - 2 Boxes of Sand Paper for Board Sander

#841 - Dremel Tool

#843 - Ridged Pipe Wrench

#845 - Pneumatic Die Grinder with Assorted Bits, Sanding Disc, Etc.

#847 - Lot of Snap-On Screwdrivers, Snap-On Ratchet, Blue Point Hammer

#849 - Large Socket Lot Metric and SAE Sockets, Most Appear to be Snap-On, 3/8" and 1/2" Drive

#852 - 2 Starrett Precision Signs, 1 Plexi-Glass/Lexan (Approx. 3'L) , 1 Wooden (Approx. 5'L)

#854 - 2 Oil Cans with Long Spouts

#856 - Lot of Assorted Files

#858 - Approx. 6'H Multi Drawer, Approx. 60 Drawer, Cabinet

#860 - 2 Chicago Electric Polishing Kits, Small Bin with Nuts/Bolts, Oiling Cans

#862 - Shelf Lot Consisting of C-Clamps, Screws, Abrasives

#864 - 2 Vintage Hand Drills, Chicago Heights

#866 - 3 Conduit Benders

#868 - Come Along

#870 - Lot of Metal Lifting Attachments

#872 - Chain Pipe Wrench

#874 - Cabinet with Drawers, Approx. 30"W

#876 - Right-Way Electric Chain Fall Believed to be 1/2 Ton, 110V. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $50.00. No other rigger is permitted onsite.

#878 - Blower Part, Housing, Bearings

#880 - Approx. 5 1/2'H Parts Cabinet with 12 Drawers

#882 - Lot of Carts

#884 - Cantilever Engine Puller

#886 - Approx. 12x12 Rubber Flooring, Approx. 650sq. Ft. Approx. 50' of Angled Edging

#888 - Workbench with Drawer System Underneath, Approx. 38"L (MUST BE REMOVED DAY AFTER REMOVAL)

#890 - 28"W Drawer Cabinet with 11 Drawers (MUST BE REMOVED DAY AFTER REMOVAL)

#892 - Drawer Cabinet, Approx. 30"W x 58"H, with 12 Drawers (MUST BE REMOVED DAY AFTER REMOVAL)

#894 - Drawer Cabinet, Approx. 28"W x 59"H (MUST BE REMOVED DAY AFTER REMOVAL) *Photo Will Be Available After Inspection*

#896 - Pallet Racking, 1 Section 2 Uprights 8 Cross Braces, Approx. 10'L (MUST BE REMOVED DAY AFTER REMOVAL)

#898 - Self Tipping Dumpster/Hopper. Onsite Exclusive Rigger will disassemble and load on your trailer for the following flat fee: $25.00. No other rigger is permitted onsite.